Tips For Replacing a Window Handle
Changing your window handle is an easy project that can be completed in the comfort of your own home. Follow these guidelines to ensure a smooth and beautiful finish.
Start by removing the screw covers to reveal the screws within the uPVC window handle. Measure the spindle to make sure you're getting the right size replacement.
1. Take a measurement of the length of the Spindle.
It's important that you get the spindle size right when replacing windows handles. It can influence the tightness or looseness of the handle, as well as whether the handle locks correctly into the window frame. The spindle is a metal shaft that connects the handle to the lock on the frame of the window. The spindle is available in the standard cross-section of 8mm for industry or the more traditional versions that measure 9mm. The modern industry standard is 8mm however this was not always the case. When purchasing a new handle, it is important to check the measurements.
The easiest way to measure the length of the spindle is remove the handle that is currently in place, this can be done by turning it into the open position, then unscrewing the two screws (which could be hidden behind plastic caps that will require removal) that retain the handle. Once removed measure from the base of the handle until the end of the spindle. This will give you the measurements needed to buy a replacement.
There are many options available when it comes time to choose the right window handle. From sleek chrome that will fit in with a modern style, to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or the more traditional Tudor cottages with mongoose tails curled. The options are endless but the most important thing is to choose a style that suits your home.
Espag handles are typically fitted to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Window handles from Cadenza are a different size since they have an angled blade that operates a multi-point locking mechanism inside the window.
Another factor when choosing a new window handle is knowing what hand you need to use. This is determined by what hand you use to open the door. Inline espag handles are compatible with right or left-handed windows. Cranked window handles are only used for windows that open in a single direction.
2. Remove the Handle
The handle may be damaged or just worn out or simply worn out, a window handle that falls off can be very frustrating. The good news is, you can repair the uPVC handle by yourself. All you require is the most basic tools and a bit of time to complete the process.
First, you must open the window and then ensure that it's not locked. Then, take off the screw caps that hold the handle in position. Once these are removed, you can start working on the removal of the handle itself.
The handle itself is fixed to a spindle inside the window frame. This is either fixed with screws or pins dependent on the kind of handle. The most common handle types are inline Espagnolette handles and handles with cockspurs. Both types of handles are found on casement windows, as well as aluminum ones. They can be locked using keys to prevent the opening of the window from outside or you can lock them by turning the handle clockwise.
To remove the handle you will need to use a flat blade screwdriver to remove the clip that holds the handle in place. Once the clip is released, the handle should slide off the spindle. After the handle is removed, you'll need to measure the spindle length and make sure that your new handle is a good fit.
Once you have the right size, you can fix the new handle into the correct position. You will need to make sure that the new handle is securely attached and that it turns the correct way (clockwise for open and counterclockwise for closed). upvc door handle www.repairmywindowsanddoors.co.uk is essential to ensure that the handle hasn't been placed upside down.
Replace the screw caps. After you've done this, you can test the handle to make sure that it is working correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked one and then back.
3. Take off the Screws
A uPVC window handle is a crucial component of every home and is often the first item to exhibit signs of wear and tear or damage. This could be due to natural elements or by regular use, or malicious damage caused by opportunistic criminals who may want to open a closed window and gain access to your property. A simple repair can fix the issue and prevent it from occurring again.
uPVC handles can also be difficult to open when the locking mechanism isn't functioning correctly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism, rather than the whole handle. This could save you money.
After you've removed the old handle you'll need to take off the screws that were that held it in place. They are usually located on the inside face of the handle base. You may need to use a screwdriver to accomplish this and it's crucial to not over tighten as this can cause the handle to loosen.
You'll then have to find the fixing screws or pins that hold the new handle in the correct position. They are typically located on the inside of the handle base. You'll require a screwdriver to take them off. If you wish to, you can replace the caps on the screw and test the handle to make sure it functions correctly.
Install the handle by aligning the spindle with the window's cutout mechanism. Then screw it into. Make sure the handle is in an open position and that any screws are secured before replacing the screw covers if you wished to do so. After this is done, you're all done and you are able to enjoy your new window handle. I hope this will enable you to avoid having to pay for costly window and door replacement services in the future. If you'd like to get more assistance in this, or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is easy and can be accomplished in just a few steps. Identifying the type of window handle, determining the length of its spindle and knowing the tools you'll require to complete the task are essential. Safety is always the primary priority when working with tools and windows. It's also important to be patient and follow the steps to ensure you have a functioning handle that is safe to use.
To begin, find the screws that hold your window handle. Remove them while holding the handle firmly to prevent it from falling and causing an injury. Once the screws are removed they can be repositioned in a safe place to be replaced later.
After the handle that was used previously is removed, you can begin fitting the new one. The handle should be fitted perfectly in order to function correctly and keep the window in its closed position. Then, slide the metal bar that is square on the handle into the window mechanism hole.
Once your new handle is in place, the last step is to replace the caps on the screws and test it to make sure it functions. If you are not satisfied with the result or the window doesn't open and close properly Contact our experts for help.
Almost all homes in the UK have uPVC windows, and as such, many of them will need to be replaced because of wear or damage. The process is relatively straightforward and can be carried out by anyone with some experience in DIY. It is essential that the handle you choose matches the dimensions and style of the window. Contact our team if you aren't sure of the kind of handle you require. They'll be able to guide you through all the choices.